Sharp S FT4015 free download

File name S_FT4015.PDF

IMPORTANT SAFETY NOTICES PREVENTION OF PHYSICAL INJURY 1. Before disassembling or assembling parts of the copier and peripherals, make sure that the copier power cord is unplugged. 2. The wall outlet should be near the copier and easily accessible. 3. Note that the optional tray heater and the optional anti-condensation heaters are supplied with electrical voltage even if the main switch is turned off. 4. If any adjustment or operation check has to be made with exterior covers off or open while the main switch is turned on, keep hands away from electrified or mechanically driven components. 5. The inside and the metal parts of the fusing unit become extremely hot while the copier is operating. Be careful to avoid touching those components with your bare hands. HEALTH SAFETY CONDITIONS 1. Toner and developer are non-toxic, but if you get either of them in your eyes by accident, it may cause temporary eye discomfort. Try to remove with eye drops or flush with water as first aid. If unsuccessful, get medical attention. OBSERVANCE OF ELECTRICAL SAFETY STANDARDS 1. The copier and its peripherals must be installed and maintained by a customer service representative who has completed the training course on those models. SAFETY AND ECOLOGICAL NOTES FOR DISPOSAL 1. Do not incinerate toner cartridges or used toner. Toner dust may ignite suddenly when exposed to open flame. 2. Dispose of used toner, developer, and organic photoconductors in accordance with local regulations. (These are non-toxic supplies.) 3. Dispose of replaced parts in accordance with local regulations. SECTION 1 OVERALL MACHINE INFORMATION 20 December 1996 SPECIFICATIONS Information 1. SPECIFICATIONS Overall Configuration: Desk Top Copy Process: Dry electrostatic transfer system Originals: Sheet/Book Original Size: Maximum: A3/11" x 17" Copy Paper Size: Maximum: A3/11" x 17" Minimum: A5/51/2" x 81/2" sideways (Paper tray feed) A6/51/2" x 81/2" lengthwise (By-pass feed) Non-standard sizes: Vertical 45 mm ~ 308 mm, 1.8" ~ 12" Horizontal 148 mm ~ 432 mm, 5.8" ~ 17" Copy Paper Weight: Paper tray feed: 64 to 90 g/m2, 17 to 24 lb By-pass feed: 52 to 157 g/m2, 14 to 42 lb Reproduction Ratios: Metric Version Inch Version 200% 200% Enlargement 141% 155% 122% 129% Full Size 100% 100%